Network Drop Installation: What It Is, What Drives the Cost, and How to Plan It

Network Drop Compu Type

You hire two new people, buy a new copier and decide to add a security camera by the back door. Suddenly there aren’t enough network jacks, power strips are full of switches and someone’s running a cable across the floor.

The fix is a network drop. Here’s what that means, what affects the cost of network drop installation, and how to plan drops so you aren’t calling an installer again in six months.

What is a network drop?

A network drop is a single cable run from your network closet or server rack to a jack at a specific location: a desk, a ceiling, a wall or a camera mount. Each drop gives one device a dedicated wired connection to your network.

A complete drop includes:

  • The cable itself, usually Cat6 or Cat6a
  • A jack and wall plate (or a ceiling or surface-mount box) at the device end
  • A termination on the patch panel in your network closet
  • A label at both ends so anyone can trace it later
  • A test to confirm the run performs at its rated speed

If any of those pieces are missing, you don’t have a finished drop. You have a cable in a wall.

What needs a network drop?

Wi-Fi is convenient, but these devices work better (or only work) on a wired connection:

  • Desktop computers and workstations that move large files or use cloud software all day
  • VoIP desk phones, which need a stable connection for clear calls (see our post on what a good phone installation looks like)
  • Wireless access points, which are themselves powered and connected by a drop in the ceiling
  • Security cameras, which usually get power and data over one cable (PoE)
  • Printers and copiers shared across the office
  • Point-of-sale systems, time clocks and badge readers

A useful rule of thumb: count every device that sits in one place and needs the network, then add at least one spare drop per work area.

What drives the cost of network drop installation

There’s no single price per drop, because every building is different. These are the factors that move the number most:

  1. Distance to the network closet. Longer runs use more cable and labor. Runs over 100 meters (328 feet) need a different design, such as a second closet or fiber.
  2. Building construction. Drop ceilings are the easiest. Hard ceilings, block walls, concrete floors and finished drywall all add time.
  3. Cable type. Cat6a and plenum-rated cable cost more than standard Cat6. Plenum cable is required in many air-handling ceiling spaces.
  4. Number of drops. Running ten drops at once costs far less per drop than running one at a time over a year.
  5. Condition of the closet. If the patch panel is full or the rack is a tangle of unlabeled cable, cleanup may come first.
  6. After-hours work. Installing at night or on weekends avoids disrupting staff but can change the labor rate.

Should you choose Cat6 or Cat6a?

For most offices, Cat6 handles everything a small business needs today. Cat6a costs more but supports 10 Gbps over the full 100-meter run and is the safer choice for new construction, high-powered Wi-Fi access points and anything you want to last 15+ years. Our Cat5e vs. Cat6 vs. Cat6a comparison goes into detail.

Why it pays to plan drops as structured cabling

Adding drops one at a time, by whoever is available, is how offices end up with mystery cables and a closet nobody wants to open. Structured cabling treats your wiring as one organized system: every run goes back to a labeled patch panel, follows industry standards and is documented. When something stops working, a technician can find the problem in minutes instead of hours.

If you’re moving offices or planning a buildout, our data cabling checklist covers what to decide before the walls close.

Signs your office needs new drops (or a cabling cleanup)

  • Small switches sitting under desks to split one jack into several
  • Patch cables running across floors or under rugs
  • Unlabeled cables in the network closet
  • Wi-Fi dead zones in parts of the building
  • Connections that drop when someone bumps a cable
  • Old Cat5 or Cat5e cable feeding newer equipment

Local network cabling from CompuType

CompuType’s low voltage team handles office network cabling for businesses across Belleville, O’Fallon, Edwardsville and the Metro East, and for St. Louis-area businesses from our Belleville office. We install Cat6, Cat6a and fiber; set up server racks and network closets; and run cabling for phones, wireless access points and security cameras, all to TIA/EIA and NEC standards.

Because we’re also a managed IT provider, we look at the whole network, not just the cable. Whether you need two drops for new hires or network cabling for a whole building, call (618) 233-8500 or contact us to schedule a site evaluation.

© 2026 CompuType IT Solutions